H05V2-U Power Cord for Glazing Machine

Cable Construction

Solid bare copper single wire
Solid to DIN VDE 0281-3, HD 21.3 S3 and IEC 60227-3
Special PVC TI3 ore insulation
Cores to VDE-0293 colors on chart
H05V-U (20, 18 & 17 AWG)
H07V-U (16 AWG and Larger)

Type: H stands for Harmonized Organization (HARMONIZED), indicating that the wire follows the EU harmonized standards.

Rated voltage value: 05 = 300/500V, which means that the rated voltage of the wire is 300V to ground and 500V between phases.

Basic insulation material: V = polyvinyl chloride (PVC), which is a common insulation material with good electrical properties and chemical resistance.

Additional insulation material: None, only composed of basic insulation material.

Wire structure: 2 = multi-core wire, indicating that the wire consists of multiple wires.

Number of cores: U = single core, meaning that each wire contains one conductor.

Grounding type: None, because there is no G (grounding) mark, indicating that the wire does not contain a dedicated grounding wire.

Cross-sectional area: The specific value is not given, but it is usually marked after the model, such as 0.75 mm², indicating the cross-sectional area of ​​the wire.

Standard and Approval

<HAR> HD 21.7 S2
VDE-0281 Part-7
CEI20-20/7
CE Low Voltage Directive 73/23/EEC and 93/68/EEC
ROHS compliant

Technical Characteristics

Working voltage：300/500V (H05V2-U) ; 450/750V (H07V2-U)
Test voltage：2000V (H05V2-U) ; 2500V (H07V2-U)
Flexing bending radius：15 x O
Static bending radius：15 x O
Flexing temperature：-5 oC to +70 oC
Static temperature：-30 oC to +80 oC
Short circuit temperature：+160 oC
Temperature CSA-TEW：-40 oC to +105 oC
Flame retardant：IEC 60332.1
Insulation resistance：10 MΩ x km

Features

Easy to peel and cut: Designed for easy installation and maintenance.

Easy to install: Suitable for fixed installation inside electrical equipment or inside and outside lighting devices

Heat resistance: The maximum temperature of the conductor can reach 90℃ during normal use, but it must not come into contact with other objects above 85℃ to avoid the risk of overheating.

Compliant with EU standards: Meets EU coordinated standards to ensure the safety and compatibility of wires.

Application

Fixed wiring: Suitable for fixed wiring of heat-resistant cables, such as inside electrical equipment or lighting systems.

Signal and control circuits: Suitable for signal transmission and control circuits, such as in switch cabinets, motors and transformers.

Surface mounting or embedded in conduit: Can be used for surface mounting or embedded in conduit, providing flexible wiring solutions.

High temperature environment: Suitable for high temperature environment, such as glazing machines and drying towers, but avoid direct contact with heating elements.

H05V2-U power cord is widely used in various electrical equipment and lighting systems due to its heat resistance and easy installation, especially in occasions where fixed wiring and operation within a certain temperature range are required.

Cable Parameter